EasyPet EP-380R Руководство пользователя - Страница 4
Просмотреть онлайн или скачать pdf Руководство пользователя для Средство для ухода за домашними животными EasyPet EP-380R. EasyPet EP-380R 19 страниц. Easypet rechargeable multi-dog remote training system
Печатать страницу
From Level 90 to Level 99, it has the strongest static pulse stimulation intensity again
with different correction durations (from 200ms/0.2 second to 2 seconds).
Quick Start Guide
Step 1: Prepare the Remote Transmitter Handset
The transmitter handset should normally have battery power left and you can start
using it without putting it on charge first.
To switch on the transmitter, press and hold ON button (+) on the transmitter for 3
seconds. To switch it off, please press and hold OFF button (–) for 3 seconds.
If battery status bar shows empty bar on LCD display, it means the battery is running
down and please charge the transmitter with the supplied charger plug immediately.
When the battery is low, the LCD backlight will flash three times whenever the "T"
button is pressed, to prompt the you to charge the transmitter.
Charging the Transmitter:
into the charger port of the transmitter which is located at the bottom part of the
transmitter handset. If the transmitter handset is switched off, please turn it on
during charging. The battery status bar on LCD display will start flashing with moving
bars. When the battery status bar stops flashing with full bars showing, the
transmitter is fully charged. The normal charging time for transmitter is around 4
hours, for new battery, it will take longer to get fully charged in the first few cycles.
Please remove the power plug from the wall socket when the transmitter is fully
charged.
Plug the supplied wall charger into the wall socket and
Press and hold down the ON button
for 3 seconds to turn on the
transmitter
Press and hold down the OFF button
for 3 seconds to turn off the
transmitter
Short press T button to send out a
command to the collar receiver