DieHard Portable Power 1150 Руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Дистанционное пусковое устройство DieHard Portable Power 1150. DieHard Portable Power 1150 12 страниц. Diehard portable power 1150 battery charger operator's manual
Также для DieHard Portable Power 1150: Руководство пользователя (11 страниц), Руководство по эксплуатации (16 страниц), Руководство по эксплуатации (15 страниц), Руководство по эксплуатации (17 страниц)
Печатать страницу
NOTE: To prevent overheating, the compressor has built-in thermal protection that
will turn the compressor off before it overheats. If the compressor shuts off, wait a few
minutes and it will automatically restart when the compressor cools.
NOTE: The air compressor is rated for 150 PSI.
Vehicle Tires 13" to 16"
Bike Tire
Sports Balls
These times are approximate; use the air compressor gauge to ensure the proper
pressure has been reached. Do not overinflate.
8.7
Using the Inflator
Risk of explosion.
Read instructions of the product being inflated before using the inflator. Avoid
overinflation, do not exceed the manufacturer's recommended pressures. Do
not leave the inflator unattended during use.
1.
2.
located near the inflator ON/OFF switch on the back of the jump starter.
3.
The main accessory adapter attached to the corrugated hose accommodates up to 4
sizes. If another size is needed, an additional adapter can be attached to the end of
the main accessory adapter.
4.
Insert the adapter into the product to be inflated.
5.
Push the Inflator switch to the ON position and inflate the product.
6.
When product is inflated to the desired level, push the Inflator switch to the OFF
position and remove the adapter.
24" Beach Ball
Pool Raft
Queen-size Air Mattress
2 Person Boat
Times are estimates and will vary depending on size and product features.
8.8
Using the Deflator
1.
Ensure that the battery clips are securely on the storage holders.
2.
Attach the corrugated hose with the end adapter to the high-flow deflator port, which
is located on the side of the jump starter.
3.
The main accessory adapter attached to the corrugated hose accommodates up to 4
sizes. If another size is needed, an additional adapter can be attached to the end of
the main accessory adapter.
4.
Insert the adapter into the item to be deflated.
5.
Push the Inflator switch to the ON position and deflate the item.
6.
When the product is deflated to the desired level, push the Inflator switch to the OFF
position and remove the adapter.
8.9
Before Using the Inverter
Important Safety Instructions:
1.
Keep the jump starter well ventilated in order to properly disperse heat generated
while it is in use. Make sure there are several inches of clearance around the top and
sides, and do not block the vents on the back of the jump starter.
2.
Make sure the jump starter is not close to any potential source of flammable fumes,
gases or clothing.
Estimated Time for Inflating
Ensure that the battery clips are securely on the storage holders.
Attach the corrugated hose with end adapter to the high-flow inflator port
Estimated Time for Inflating
6 to 24 minutes
1 to 3 minutes
30 seconds
1 to 3 minutes
4 to 6 minutes
4 to 8 minutes
8 to 10 minutes
7
•
•