Axminster CSC500K Руководство пользователя - Страница 3
Просмотреть онлайн или скачать pdf Руководство пользователя для Инструменты Axminster CSC500K. Axminster CSC500K 8 страниц. Key operated woodturning chuck set
Печатать страницу
Good Working Practices/Safety
The following suggestions will enable you to observe good working
practices, keep yourself and fellow workers safe and maintain your
tools and equipment in good working order.
!
WARNING!!
1. Do not wear gloves or loose clothing when turning.
2. Do not wrap any strip sandpaper or clothing around your hands or fingers when
sanding or turning.
3. Use proper eye protection when turning.
4. Check your wood for splits, weakness or cracking prior to mounting on the
chuck.
5. Confirm that the wood is tightly gripped before turning your chuck under power.
6. Rotate the chuck manually prior to starting your lathe to confirm proper
clearance.
7. Always check and re-lighten after any problem or catch.
8. Use appropriate speeds as referenced in instructions.
9. Always turn with sharp lathe chisels.
10. Capture fine particles from the air with a dust collector.
11. Keep clean and lubricate with a light coat of oil.
Model Number:
A CSC500K 65mm Barracuda chuck (pre-threaded for 1" x 8tpi)
B 1 Set (4 pieces) gripper jaws (shipped pre-mounted to chuck)
C 1. Hex wrench
D 1 Tightening Key
E 1 Set( 4 piece) extended pin jaws
F 1 Set (4 piece) step jaws
G 1 Set (4 piece) internal & external gripper jaws
H 1 Screw chuck
H 1 3/4" x 16tpi adaptor
Instruction Manual
Safety Instructions for Chuck Systems...
KEEP TOOLS AND EQUIPMENT OUT
OF THE REACH OF YOUNG CHILDREN
What's in the Box...
(210307) CSC500K
02