Axminster Trade Series Руководство пользователя - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя для Инструменты Axminster Trade Series. Axminster Trade Series 20 страниц. Wall mounted extractor

Печатать страницу

Be aware that in dry air periods or areas, the movement of the

air through the machine can generate static electric fi elds.

These are not normally a problem as the machine is bonded

together via its construction and the whole is earthed back

through the electrical supply; problems can occur with isolated

items, such as stands or hosing that are insulated from the

ground (standing on rubber feet, suspended in the air etc).

If possible, try to connect everything together electrically, to

eliminate static shocks.

ONLY USE DUST EXTRACTION BAGS

WITH THIS MACHINE NOT DOMESTIC

WASTE BAGES!

Code

Model

Rating

Power

Air Flow

Noise Level

Particle Size

Hose Diameter

Bag Capacity

Overall L x W x H

Weight

Please read through the section entitled Parts Identifi cation and Description, this will enable you to more readily identify those

parts of the cyclone extractor.

Please note: some of this assembly procedure is best accomplished by two persons. Although the tasks are not

impossible, some of the items are heavy and awkward, and a mishandling error could cause injury. Please think

about what you are doing, your capabilities and your personal safety. We have added the 'two person symbol' to

any operation that we recommend should be a two person task.

Unpack all the boxes and check all the components listed in the "What's Included" section. If any parts or components are missing,

please contact our Customer Services Department using the procedures and telephone numbers listed in our catalogue.

Please note: on occasions the packing list is not strictly adhered to. Please check all the boxes, packets etc. to make sure that all the

parts have been accounted for.

PLEASE RECYCLE ANY UNWANTED PACKAGING RESPONSIBLY!

Speciﬁ c Safety for Dust Extractors

Use the integral metal coil in ﬂ exible plastic hosing to connect

units together

Try to route the power cable and the hosing away from busy

walkways.

allow the inlet to become 'dead ended' , or block or

DO NOT

restrict the outlet, this puts undue strain on the motor and can

lead to overheating.

DO NOT PLACE DUST EXTRACTION

BAGES OVER THE FILTER ASSEMBLY!

Speciﬁ cation

508483

CT-50RCK

Trade

750W 230V 1ph

912m³/hr

75dbA

1 micron

100mm x 1

50L

558 x 495 x 1169mm

27kg

Assembly

Continues Over....