Axminster Trade Series Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Инструменты Axminster Trade Series. Axminster Trade Series 20 страниц. Wall mounted extractor

Печатать страницу

Assembly

Having unpacked the boxes, put all components where they

are readily to hand.

Extractor/Filter Assembly

1. Locate the extractor unit (1), Filter (2) and six M6x19mm Hex

bolts (7), see fi g 01-02 .

2. Line up the six pre-drilled holes in the fi lter assembly (2)

with the ones machined into the extractor outlet housing and

secure both units together using the six M6 Hex bolts (7), see fi g

03-04-05.

Fig 01-02

Fig 03-04-05

Filter Shaker Paddle Operating Handle

Locate the fi lter shaker paddle (4) and loosen the clamping bolt

to its base. Insert the handle mounting over the paddle drive

shaft making sure the clamping bolt is positioned over the

machined face on the shaft then tighten the bolt using an

10mm spanner to secure the handle in place, see fi g 06-07-08.

Machined face

10mm Spanner

Fig 06-07-08

Paddle drive shaft