Epson 11880 - Stylus Pro Color Inkjet Printer Руководство по информации о продукте - Страница 8

Просмотреть онлайн или скачать pdf Руководство по информации о продукте для Принтер Epson 11880 - Stylus Pro Color Inkjet Printer. Epson 11880 - Stylus Pro Color Inkjet Printer 10 страниц. Stylus pro11880
Также для Epson 11880 - Stylus Pro Color Inkjet Printer: Краткое справочное руководство (14 страниц), Брошюра (1 страниц), Брошюра и технические характеристики (8 страниц), Руководство по распаковке и настройке (28 страниц), Руководство по работе с сетью (46 страниц), Ограниченная гарантия (12 страниц), Брошюра и технические характеристики (7 страниц), Брошюра и технические характеристики (8 страниц)

Epson Stylus Pro 11880

button. The paper cutter holder moves to

4. Press the

the replacement position.

Caution:

Do not try to slide the carriage by hand, or you may damage the

printer.

5. Open the front cover.

6. Locate the cutter assembly with a blue plastic cover on the

left side of the print head.

7. Hold down the side pin as shown and turn the latch to the

right.

Caution:

To avoid damaging the printer, make sure you don't push the side

pin in too far. Do not touch the black parts inside the printer or

the cables around the print head.

8. Release the side pin carefully. The cutter pops out.

: The blade is sharp. Be careful when removing it.

WARNING

8 - Epson Stylus Pro 11880

9. Carefully remove the cutter blade.

Caution:

Wrap the used cutter blade and dispose of it according to local

regulations.

Installing the New Cutter Blade

Remove the new blade from its package, then follow these

steps to install it:

1. Insert the new cutter as shown. Make sure the spring

doesn't pop out.

2. Push down on the side pin while turning the latch to the

left.

3. Close the front cover. The cutter moves to the home (far

right) position.

10/07