Epson 11880 - Stylus Pro Color Inkjet Printer Ürün Bilgi Kılavuzu - Sayfa 8

Yazıcı Epson 11880 - Stylus Pro Color Inkjet Printer için çevrimiçi göz atın veya pdf Ürün Bilgi Kılavuzu indirin. Epson 11880 - Stylus Pro Color Inkjet Printer 10 sayfaları. Stylus pro11880
Ayrıca Epson 11880 - Stylus Pro Color Inkjet Printer için: Hızlı Referans Kılavuzu (14 sayfalar), Broşür (1 sayfalar), Broşür ve Teknik Özellikler (8 sayfalar), Ambalajdan Çıkarma ve Kurulum Kılavuzu (28 sayfalar), Ağ Kılavuzu (46 sayfalar), Sınırlı Garanti (12 sayfalar), Broşür ve Teknik Özellikler (7 sayfalar), Broşür ve Teknik Özellikler (8 sayfalar)

Epson Stylus Pro 11880

button. The paper cutter holder moves to

4. Press the

the replacement position.

Caution:

Do not try to slide the carriage by hand, or you may damage the

printer.

5. Open the front cover.

6. Locate the cutter assembly with a blue plastic cover on the

left side of the print head.

7. Hold down the side pin as shown and turn the latch to the

right.

Caution:

To avoid damaging the printer, make sure you don't push the side

pin in too far. Do not touch the black parts inside the printer or

the cables around the print head.

8. Release the side pin carefully. The cutter pops out.

: The blade is sharp. Be careful when removing it.

WARNING

8 - Epson Stylus Pro 11880

9. Carefully remove the cutter blade.

Caution:

Wrap the used cutter blade and dispose of it according to local

regulations.

Installing the New Cutter Blade

Remove the new blade from its package, then follow these

steps to install it:

1. Insert the new cutter as shown. Make sure the spring

doesn't pop out.

2. Push down on the side pin while turning the latch to the

left.

3. Close the front cover. The cutter moves to the home (far

right) position.

10/07