Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для Принтер Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer. Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer 28 страниц. User guide - remote configuration manager
Также для Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer: Технические характеристики (2 страниц), Обновление микропрограммы (1 страниц), Руководство пользователя (15 страниц)

Chapter 2

Loading Paper

Your printer can load paper from a front tractor and a rear tractor. Be sure to

leave enough room around the printer for the two stacks of fresh paper and for

the printed stack. Align your paper supply so the paper feeds smoothly into the

printer.

front tractor

rear tractor

Place the paper supply lower than the printer to avoid a paper jam. Make sure

that your stack of printed pages does not interfere with the rear tractor's paper

supply.

You can use the following types of continuous paper with either tractor:

Single-sheet

Multi-part

Labels

Continuous forms with labels

Overlapping multi-part forms

both tractors

You can print on continuous paper from 3 inches (76.2 mm) to 16.5 inches

(419.1 mm) wide. Your printer senses the paper width automatically.

The printer automatically adjusts to the thickness of the paper loaded when the

platen gap setting is set to

in SelecType mode. See "Using SelecType

Auto

Mode" on page 18 for details.

Note:

Make sure your paper matches the specifications described in the on-screen

Reference Guide.

When the optional perforation cutter (part number C81507X) is installed, the

printable width is from 4 inches (101.6 mm) to 16 inches (406.4 mm).

Lift up the front cover until it locks in place.

Release the right and left sprockets by pulling the lock levers down.

sprocket lock lever

Loading Paper 9