ABB C1900 Series Руководство по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Измерительные приборы ABB C1900 Series. ABB C1900 Series 20 страниц. Circular chart recorder and recorder/controller
Также для ABB C1900 Series: Руководство по установке (20 страниц), Руководство пользователя (20 страниц), Руководство по эксплуатации (12 страниц), Руководство по установке (20 страниц), Руководство по установке (16 страниц)

...4 OPERATION

The instrument has dedicated

monitoring of the process measurements and are not affected by the security system which inhibits access to the

only – see Section 4.5 on page 12.

LEVELS

4.1 Input Error Messages – Fig. 4.2

Message

Ad. F AIL

Internal analog to digital converter system hardware has failed

Input is above or below fault detection level.

F–INPt

Input exceeds the limits for the linearizer selected

Examples

Ad. F AIL

200. 5

Note. Error messages are cleared automatically when the fault condition no longer exists.

in the

Operating Pages

OPERATOR LEVEL

Reason

Hardware failure on

Process Variable 1

Fig. 4.2 Input Error Messages Displayed in the Operating Page

– see Sections. 4.1 to 4.4. These pages are used for general

• Check that the input/output board is located correctly

in its socket.

• Power down and up

If the 'Ad. F AIL' message is still present, contact the

local service organization

• Check input source for possible broken sensor

• Check input connections

• Check input link position

• Check input configuration in

200. 5

F–INPt

Input out of range on

Process Variable 4

PROGRAMMING

Action

Set Up Input Page