Digilock numeris aspire Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Клавиатура Digilock numeris aspire. Digilock numeris aspire 11 страниц. Touch rfid latch mechanism
Также для Digilock numeris aspire: Руководство по установке (16 страниц), Руководство по эксплуатации (6 страниц)
Печатать страницу
Programming Instructions
Set Lock Functionality
Each lock can be set for either shared or assigned use functionality. Press
use, LED is green.
1
To set for assigned use:
Press
= ` 6 5 `
The red LED will turn on.
Assign User Credentials (for assigned use functionality only)
Make sure that the lock is set for assigned use functionality (a green LED will flash when
and/or User Keys) may be assigned to each lock.
1a
Assign User Codes:
Press
= ` 5 5 `
The LED will turn on.
Insert a valid Manager Key.
A two-tone beep will be heard.
1a
Assign User Keys:
Press
= ` 5 5 `
The LED will turn on.
Insert a valid Manager Key.
A two-tone beep will be heard.
4
2
Insert the Programming Key.
.
A two-tone beep will be heard
and the green LED will flash
once.
1b
.
1b
.
Product Guide
Standard Keypad
Bolt Mechanism
to check functionality. If in shared use, LED is red. If in assigned
=
1
To set for shared use:
Press
= ` 5 6 `
The green LED will turn on.
is pressed). Up to 20 user credentials (User Codes
=
2a
[a new 4-7 digit code]
Press
=
[the same 4-7 digit code]
Press
=
Two sets of two-tone beeps will be heard and the LED will turn off.
2
Insert a User Key.
Two sets of two-tone beeps will be heard and the LED will turn off.
Shared & Assigned Use Functionality
2
Insert the Programming Key.
.
A two-tone beep will be heard
and the red LED will flash
once.
2b
. A two-tone beep will be heard.
`
.
`