Crescent SC250 Руководство по эксплуатации и техническому обслуживанию - Страница 2
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Напольная машина Crescent SC250. Crescent SC250 2 страницы.
Также для Crescent SC250: Руководство по эксплуатации и техническому обслуживанию (2 страниц)
Печатать страницуATTENTION! Do not use the machine before you have read and understood the Instructions for use manual
1. Disconnect the battery charger
2. Fill the solution tank with clean
cable from the electrical main.
6. Grab the handles to activate the
7. Press the solution button, according
to the type of cleaning to be
performed.
At the end of the work
11. For the transportation and the
11. Empty the recovery and solution
parking of the machine, push
down the pedal (slightly lift the
front of the machine by tilting the
handlebar).
15. Clean the squeegee and the cylin -
15. Clean the debris collection tray.
drical brush with water.
ALWAYS FOLLOW THE DETERGENT DOSING RECOMMENDATION ON THE LABEL OF THE CHEMICAL PRODUCT USED.
All manuals and user guides at all-guides.com
3. The tank cap can be used for
water. The clean water temperature
dosing the detergent. One full cap
must not exceed 40 °C.
is 30ml giving 0,5% detergent of
the 6L tank capacity. (*)
8. For sweeping functions, lift/lock the
right lever to lift the front squeegee
in order to collect light debris.
12. Wash with clean water the cover
tank. Clean them with water.
and the vacuum grid.
16. Clean the machine using a damp
cloth and where needed use a neu -
tral cleaning product.
4. Adjust the handle to the desired
5. Lift the pedal to lower the machine
height.
Turn on the machine with the main
button.
9. For double scrubbing, press the
10. Turn off the machine with the main
button to switch off the vacuum.
13. Check and clean the solution and
14. Remove the squeegee.
17. Charge the batteries: Connect the
18. Then store the machine in a clean
battery charger cable from the
electrical main.
www.crescentindustrial.co.uk
SC250
and start working.
button.
Unscrew by turning the knob
clockwise to remove the
cylindrical brush.
and dry place.