Crescent SC250 Kullanım ve Bakım Kılavuzu - Sayfa 2

Zemin Makinesi Crescent SC250 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Crescent SC250 2 sayfaları.
Ayrıca Crescent SC250 için: Kullanım ve Bakım Kılavuzu (2 sayfalar)

Sayfayı Yazdır

ATTENTION! Do not use the machine before you have read and understood the Instructions for use manual

1. Disconnect the battery charger

2. Fill the solution tank with clean

cable from the electrical main.

6. Grab the handles to activate the

7. Press the solution button, according

to the type of cleaning to be

performed.

At the end of the work

11. For the transportation and the

11. Empty the recovery and solution

parking of the machine, push

down the pedal (slightly lift the

front of the machine by tilting the

handlebar).

15. Clean the squeegee and the cylin -

15. Clean the debris collection tray.

drical brush with water.

ALWAYS FOLLOW THE DETERGENT DOSING RECOMMENDATION ON THE LABEL OF THE CHEMICAL PRODUCT USED.

All manuals and user guides at all-guides.com

3. The tank cap can be used for

water. The clean water temperature

dosing the detergent. One full cap

must not exceed 40 °C.

is 30ml giving 0,5% detergent of

the 6L tank capacity. (*)

8. For sweeping functions, lift/lock the

right lever to lift the front squeegee

in order to collect light debris.

12. Wash with clean water the cover

tank. Clean them with water.

and the vacuum grid.

16. Clean the machine using a damp

cloth and where needed use a neu -

tral cleaning product.

4. Adjust the handle to the desired

5. Lift the pedal to lower the machine

height.

Turn on the machine with the main

button.

9. For double scrubbing, press the

10. Turn off the machine with the main

button to switch off the vacuum.

13. Check and clean the solution and

14. Remove the squeegee.

17. Charge the batteries: Connect the

18. Then store the machine in a clean

battery charger cable from the

electrical main.

www.crescentindustrial.co.uk

SC250

and start working.

button.

Unscrew by turning the knob

clockwise to remove the

cylindrical brush.

and dry place.