DIGISYSTEM APS20201 Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Источник питания DIGISYSTEM APS20201. DIGISYSTEM APS20201 9 страниц. Variable frequency vibrators power supply
Печатать страницу
PIN REF.
SIGNAL DESCRIPTION
PC1
GROUND CONNECTION
M3-6
PC1
MAINS INPUT (NEUTRAL)
M3-5
PC1
MAINS INPUT (PHASE)
M3-4
GROUND CONNECTION
D2-T
OUTPU SUPPLY FOR VIBRATOR
D2-1
D2-2
OUTPU SUPPLY FOR VIBRATOR
PC3
0V INSULATED
M2-4
PC3
START COMMAND INPUT
M2-3
(required current 10 mA)
PC3
+18V INSULATED
M2-1
PC3
OUTPUT INVERTER OK SIGNAL
(PNP)
M2-2
Note:
The guts of the vibrator must be grounded with a appropriate wire.
Before feeding the device verify that there are not ground dispersions on
wires connecting the power supply to the vibrator; The power supply will be
damaged if one of the two output wires is grounded.
WIRING TABLE
WIRE
SECTION
mmq
3x1
3x1
3x1
3x1
shielded
3x1
shielded
3x1
shielded
5
WIRE
COLOR
YELLOW-GREEN
BLUE or
WHITE
BROWN
CONNECT TO:
EARTH
230 Vac
230 Vac
VIBRATOR
MECHANICAL
VIBRATOR COIL
VIBRATOR COIL
0V
SENSOR OR
CONTACT
+18V
PLC INPUT