Sharp AR-NB3 Руководство по печати - Страница 37

Просмотреть онлайн или скачать pdf Руководство по печати для Принтер "все в одном Sharp AR-NB3. Sharp AR-NB3 41 страница. Digital copier/printer/multifunctional system option
Также для Sharp AR-NB3: Работа сетевого сканера (40 страниц), Руководство по выбору (44 страниц)

Печатать страницу

TROUBLESHOOTING

Problem

The printed image

is skewed or it

runs off the paper.

A notice page is printed

If you find that a notice page has been printed at the end of a print job, the print data received from the computer has

not been printed as specified. Fix the problem as explained below and then try printing again.

What to do when a notice page is printed

****************************************************

Notice Page

****************************************************

The IMC memory full error had occurred,

a normal output was not able to be executed.

Please refer to the operation manual for

the solution method.

The above notice page is printed when a print job

containing more data than can be held in the memory

of the dual function board memory is sent. If you

printed using the printer driver, remove the checkmark

from [ROPM] in the [Configuration] tab of the printer

driver setup screen to disable the ROPM function. If

you need to use the ROPM function, select a lower

resolution setting in the printer driver or increase the

amount of memory.

Cause and solution

The paper size set in the printer driver is not the same as

the paper size loaded in the tray.

→ Make sure that the paper size setting matches the size of the paper

loaded in the tray. If the [Fit to Page] setting is selected in Windows,

make sure that the paper size selected in the "Fit To Paper Size"

drop-down list is the same as the size of the paper loaded in the tray.

The image orientation setting in the printer driver is not

correct.

→ On a Windows environment, click the [Paper] tab in the printer driver

setup screen and make sure that "Image Orientation" is set to the

correct orientation. On a Macintosh, make sure that the correct

orientation is selected in the application settings.

Paper is not loaded properly.

→ Make sure the paper is correctly loaded.

The margins are not set correctly in the application.

→ Check the paper size and margin settings in the application. Also

make sure that the print settings are correct for the paper size.

• The Notice Page can be set to not print

Note

out in

"NOTICE PAGE" (page 31)

key operator programs.

When the dual function board is

installed

• The dual function board memory is used

to temporarily hold print data when the

ROPM function is used. This memory is

also used to temporarily store original

image data during a copy job. The

proportion of memory allocated to the

printer function can be changed in the key

operator programs. (See the "Key

operator's guide".) The memory can be

increased by adding the optional memory

modules. For details, contact your SHARP

dealer.

When the dual function board is not

installed

• A notice page such as "The incorrect

driver is chosen, a normal output was not

able to be executed....." will be printed if

you attempt to print using the print driver

for the dual function board. Install the

standard print driver as explained in "1.

INSTALLING THE SOFTWARE (THAT

ACCOMPANIES THE MACHINE)" in the

"Software setup guide" and select the

standard driver when printing.

Page

–

Operation manual

(for general

information and

copier)

–

of the