Shimano EW-WU101 Руководство пользователя

Просмотреть онлайн или скачать pdf Руководство пользователя для Аксессуары для велосипедов Shimano EW-WU101. Shimano EW-WU101 2 страницы. Wireless unit
Также для Shimano EW-WU101: Руководство пользователя (1 страниц), Руководство пользователя (1 страниц)

Печатать страницу

UM-72R0A-003-00

Wireless Unit

(EW-WU101)

User's manuals in other languages are available at :

http://si.shimano.com

IMPORTANT NOTICE

• Contact the place of purchase or a bicycle dealer for information on installation and adjustment

of the products which are not found in the user's manual. A dealer's manual for professional

and experienced bicycle mechanics is available on our website (http://si.shimano.com).

• Do not disassemble or alter this product.

For safety, be sure to read this user's manual thoroughly

before use, and follow them for correct use.

Important Safety Information

Guidelines that require replacement, contact the place of purchase or a bicycle dealer.

WARNING

• When the shifting switch is operated, the motor which drives the rear derailleur

will operate to the shifting position without stopping, so be careful not to get

your fingers caught.

• After reading the user's manual carefully, keep it in a safe place for later reference.

Note

• This is a small waterproof connector. Do not repeat connecting and

disconnecting it. It may impair the function.

• The components are designed to be fully waterproofed to withstand wet

weather riding conditions; however, do not deliberately place them into water.

• Do not clean the bicycle in a high-pressure car wash. If water gets into any of

the components, operating problems or rusting may result.

• Handle the products carefully, and avoid subjecting them to any strong shocks.

• Contact the place of purchase for updates of the product software. The most

up-to-date information is available on the Shimano website.

• Do not use thinners or similar substances to clean the products. Such substances

may damage the surfaces.

• Be careful not to let water get into the terminal.

• Store in a safe place out of the reach of small children to avoid letting them

swallow by mistake.

• 2.4GHz digital wireless system

2.4GHz-frequency digital wireless technology, which is the same technology

used for wireless LAN.

However, in a very rare occasions, objects and places may generate strong

electromagnetic, waves and interference, which may result in incorrect measurement.

Television, PC, radios, motors/engines, or in car and trains.

Railroad crossings and near railway tracks, around television transmitting

stations and radar bases.

Other wireless computers or digitally controlled light.

• Products are not guaranteed against natural wear and deterioration from

normal use and aging.

• For maximum performance we highly recommend Shimano lubricants and

maintenance products.

User's manual

Regular inspections before riding the bicycle

Before riding the bicycle, check the following items. If any problems are found

with the following items, contact the place of purchase or a bicycle dealer.

• Is the wireless unit securely installed to the frame?

• Is there sufficient charge remaining in the battery?

• Is there any noticeable damage to the electric wires?

• Is the mounting band cracked or damaged?

Names of parts

Functions

ANT connection

The wireless unit transmits the following three types of information to compatible

cycle computers or receivers.

1) Number of gears (front, rear)

2) Di2 battery level

3) Adjustment mode information

For information on which of the above types of information is to be displayed,

refer to the manual for your cycle computer or receiver.

* The latest functions can be checked by updating the software via E-TUBE

PROJECT. For details, consult the place of purchase.

BLE connection*

E-TUBE PROJECT for smartphones/tablets may be used if a BLE connection is

established with a smartphone/tablet. (The Error check function cannot be used.)

When using the wireless unit, combine it with one of the following units.

External type: BM-DN100, Built-in type: BT-DN110

Junction [A]

Battery (SM-BTR1)

Junction [B]

Wireless unit

(EW-WU101)

Electric wire

* BLE=Bluetooth Low Energy

How to make connections

ANT connection

To make a connection, the cycle computer needs to be in connection mode. For

information on how to put the cycle computer into connection mode, refer to the

manual for the cycle computer.

1) Put the cycle computer into connection mode.

2) When using an external battery

Check that the electric wires are connected to the wireless unit. Then, remove

and remount the external battery.

When using a built-in battery

Check that the electric wires are connected to the wireless unit. Then, remove

the electric wires (two wires) from the wireless unit and reconnect them.

( Connection transmission begins about 30 seconds after the battery is

remounted or the electric wires are reconnected to the wireless unit.)

3) This completes the connection process.

Check on the cycle computer to see if connection was successful.

If a connection cannot be made in the way described above, refer to the manual

for your cycle computer.

For information on how to show the number of gears or the Di2 battery level,

refer to the manual for the cycle computer.

BLE connection

Before setting up a connection, turn on BLE on the smartphone/tablet.

1) Open E-TUBE PROJECT and set it to listen for BLE signals.

2) Setting up via information display

Press the mode switch for about 1 second and then release. The unit on the

bicycle will begin signal transmission. The unit name displays in E-TUBE

PROJECT.

Setting up via junction A

Press the button on junction (A) for about 1 second and then release. The unit

on the bicycle will begin signal transmission. The unit name displays in E-TUBE

PROJECT.

From September, 2016 onward: following firmware update, procedure 2) will

change to the below.

Setting up via information display

Press the mode switch until "C" appears on the display. The cycle

computer will begin signal transmission. The unit name displays in

E-TUBE PROJECT.

Setting up via junction A

Press the button on junction (A) for about 1 second and then release. The

cycle computer will begin signal transmission. The unit name displays in

E-TUBE PROJECT.

3) Select the unit name displayed on screen.

* To disconnect, cancel the BLE connection from the smartphone/tablet. (The cycle

computer will exit connection mode and return to regular operation mode.)

One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003

Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222

3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan

Please note: specifications are subject to change for improvement without notice. (English)