Crestron AirMedia AM-TX3-100 Руководство - Страница 5

Просмотреть онлайн или скачать pdf Руководство для Приемник Crestron AirMedia AM-TX3-100. Crestron AirMedia AM-TX3-100 5 страниц. Connect adaptor

Known Issues

•

The Connect Adaptor generally takes about 6-15 seconds to connect and begin presenting, this will

vary based on environment. After unplugging the Connect Adaptor, it takes about 7 seconds for the

presentation to be removed from the Front of Room display.

•

When using a MacBook with an M2 chip, audio drops and popping sounds can be heard periodically.

•

When presenting from an iPad or MacBook, volume controls are not available on the user's device.

•

When running a long duration presentation from an AM-TX3-100(-I), the image may freeze on the

display or the session may drop. Reconnect the AM-TX3-100(-I) to recover and resume presenting.

•

If an AM-TX3-100(-I) is left presenting from a laptop for a long duration, stopping and restarting the

presentation may lead to the device disconnecting. Reboot the AirMedia receiver to recover.

•

In certain scenarios, after running several long duration AM-TX3-100(-I) presentations, subsequent

connection attempts will be unsuccessful. Reboot the AirMedia receiver to recover.

•

Occasionally the AM-TX3-100(-I) will not automatically come back online and resume presenting

after a firmware update. Reconnect the AM-TX3-100(-I) to recover and perform the update again if it

was not successful.

•

When connected to MacBooks, a static noise can be heard for 10-15 seconds at the start of a

presentation with audio. The device will automatically recover in about 15 seconds.

•

When connected to a MacBook and the audio output is switched between the built in speaker and

the AM-TX3-100(-I)

Licensing and Copyright Information

Certain Crestron products contain open source software. For specific information, please visit