Siemens SINAMICS G120 Компактная инструкция по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Компактная инструкция по эксплуатации для Промышленное оборудование Siemens SINAMICS G120. Siemens SINAMICS G120 32 страницы. Using blocksize converters in marine applications
Также для Siemens SINAMICS G120: Начало работы (46 страниц), Руководство по эксплуатации (32 страниц), Начало работы (30 страниц), Инструкции по установке оборудования (2 страниц), Инструкции по установке и руководство пользователя (2 страниц), Инструкции по установке (2 страниц), Инструкции по установке (2 страниц), Руководство (42 страниц), Начало работы (50 страниц), Руководство по эксплуатации устройства (34 страниц), Руководство по быстрой установке (2 страниц), Описание приложения (50 страниц), Компактная инструкция по эксплуатации (2 страниц), Руководство (31 страниц), Руководство по применению (34 страниц), Компактная инструкция по эксплуатации (2 страниц), Компактная инструкция по эксплуатации (2 страниц)

Печатать страницу
Siemens SINAMICS G120 Компактная инструкция по эксплуатации
2

Scope of delivery

The delivery comprises at least the following components:
● A CU240B-2 or a CU240E-2 control unit with firmware, which is ready to run. Options for
upgrading and downgrading the firmware can be found on the Internet: Firmware
(http://support.automation.siemens.com/WW/news/en/67364620).
The fieldbus interface of the Control Unit depends on the Article No. The Article No., the
designation and the version of the hardware (e.g. 02) and firmware (e.g. 4.6) can be
found on the rating plate
● Compact Operating Instructions in German and English
● The inverter contains open-source software (OSS). The OSS license terms are saved in
the inverter.
Reading the OSS license terms
The inverter contains open-source software (OSS). OSS comprises open source text and
satisfies special license terms. If you wish to read the license terms, you must transfer them
from the inverter to a PC.
Procedure
To transfer the OSS license terms from the inverter to a PC, proceed as follows:
1. Switch off the inverter power supply.
2. Insert an empty memory card into the card slot of the inverter. See also Section:
Overview of the interfaces (Page 8)
3. Switch on the inverter power supply.
4. When you have switched on the power supply, wait 30 seconds.
During this time, the inverter writes the "Read_OSS.ZIP" file onto the memory card.
5. Switch off the inverter power supply.
6. Withdraw the memory card from the inverter.
7. Use a card reader and load the file to a PC.
You have then transferred the OSS license terms from the inverter to a PC, and you can now
read the license terms.
6
①
of the Control Unit.
Designation
Article number
CU240B-2
6SL3244-0BB00-1BA1
CU240B-2 DP
6SL3244-0BB00-1PA1
CU240E-2
6SL3244-0BB12-1BA1
CU240E-2 F
6SL3244-0BB13-1BA1
CU240E-2 DP
6SL3244-0BB12-1PA1
CU240E-2 DP-F
6SL3244-0BB13-1PA1
CU240E-2 PN
6SL3244-0BB12-1FA0
CU240E-2 PN-F
6SL3244-0BB13-1FA0
Fieldbus
USS, Modbus RTU
PROFIBUS DP
USS, Modbus RTU
PROFIBUS DP
PROFINET IO, EtherNet/IP
CU240B-2 and CU240E-2 Control Units
Compact Operating Instructions, 04/2015, A5E35792002B AA