Digital Everywhere FloppyDTV Руководство по сборке - Страница 2
Просмотреть онлайн или скачать pdf Руководство по сборке для Приемник Digital Everywhere FloppyDTV. Digital Everywhere FloppyDTV 4 страницы.
Печатать страницу
1.3 FireWire connectors on the motherboard
This procedure is suitable only for expert users. Errors in handling cables and connectors on
the motherboard may damage the motherboard or the FloppyDTV!!!
Some motherboards have one 10 poles connector usually intended to bring the FireWire connection
to a Front or Back Panel. This connector can also be used to connect the FloppyDTV.
•
Locate the FireWire (IEEE1394) connector on the motherboard referring to the "User Manual" of
your motherboard.
•
Search the pin-out of the connector on the User Manual of your motherboard and verify that it
matches the following table.
Use the motherboard connector only if you are sure that the pin-out matches the pin-out in
the following table! The motherboard can be damaged if the pin-out doesn't match!!!
Disassemble the FireWire cable from the FloppyDTV as described below:
•
Cut the fastening string of the FireWire cable of the FloppyDTV.
•
Carefully, unplug the 10 poles connector from the "FireWire 2" port of the FloppyDTV
•
Plug the FireWire connector of the FireWire Cable on the "FireWire 1" port of the FloppyDTV.
WARNING:
Cut here
The Pin1 on the 10 Poles connector of the FloppyDTV is the one with a Green wire starting from it
(Pin10 is the one with a large Black Wire)
•
Carefully identify the Pin1 of the FireWire connector on the Motherboard and plug the 10 Poles
connector to the motherboard matching the Pin 1 of the cable to the Pin 1 of the motherboard.
Don't use any different FireWire cable from that one supplied with the FloppyDTV to connect
it to the motherboard!!!
070928-v2.1
FloppyDTV - Assembly guide
Remove gently
Pin1 has a GREEN wire!!!
Page 2
Pin
1
TPA +
2
TPA -
3
GND (Ground)
4
GND (Ground)
5
TPB +
6
TPB -
7
V+
8
V+
9
NOT USED
10
GND (Ground)
Plug in the cable
www.digital-everywhere.com