Siemens TIASTAR Руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Промышленное оборудование Siemens TIASTAR. Siemens TIASTAR 44 страницы. Motor control center
Печатать страницу
THIS EQUIPMENT CONTAINS HAZARDOUS VOLTAGES. DEATH, SERIOUS PERSONAL INJURY, OR PROPERTY DAMAGE CAN
RESULT IF SAFETY INSTRUCTIONS ARE NOT FOLLOWED. ONLY QUALIFIED PERSONNEL SHOULD WORK ON OR AROUND
THIS EQUIPMENT AFTER BECOMING THOROUGHLY FAMILIAR WITH ALL WARNINGS, SAFETY NOTICES, AND
MAINTENANCE PROCEDURES CONTAINED HEREIN.
THE SUCCESSFUL AND SAFE OPERATION OF THIS EQUIPMENT IS DEPENDENT UPON PROPER HANDLING,
INSTALLATION, OPERATION AND MAINTENANCE.
SIGNAL WORDS
The signal words "DANGER", "WARNING" and "CAUTION"
used in this manual indicate the degree of hazard that may be
encountered by the user. These words are defined as:
DANGER - For the purpose of this manual and product labels,
DANGER indicates an imminently haardous situation which, if
not avoided will result in death or serious injury.
WARNING - For the purpose of this manual and product labels,
WARNING indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION - For the purpose of this manual and product labels,
CAUTION indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
Hazardous voltage.
Will cause death or serious injury.
Always de-energize and ground the equipment
before maintenance. Read and understand this
manual before installing, operating or maintaining
the equipment. Maintenance should be performed
only by qualified personnel. The use of unauthor-
ized parts in the repair of the equipment or tam-
pering by unqualified personnel may result in dan-
gerous conditions which may cause death or seri-
ous injury, or equipment or property damage.
Follow all safety instructions contained herein.
For the purposes of this manual and product labels, a quali-
fied person is one who is familiar with the installation, con-
struction, operation or maintenance of the equipment and
the hazards involved. In addition this person has the follow-
ing qualifications:
(a) is trained and authorized to energize, de-energize, clear,
ground and tag circuits and equipment in accordance
with established safety practices.
(b) is trained in the proper care and use of protective equip-
ment such as rubber gloves, hard hat, safety glasses or
face shields, flash clothing, etc., in accordance with
established safety practices.
(c) is trained in rendering first aid.
QUALIFIED PERSON