Epson AP-60 - Projector Sound Solution Руководство пользователя - Страница 20

Просмотреть онлайн или скачать pdf Руководство пользователя для Проектор Epson AP-60 - Projector Sound Solution. Epson AP-60 - Projector Sound Solution 28 страниц. Projector sound solution
Также для Epson AP-60 - Projector Sound Solution: Руководство (5 страниц), Руководство по установке (28 страниц), Руководство по подключению (1 страниц), Список деталей (1 страниц), Брошюра и технические характеристики (4 страниц), Бюллетень поддержки продуктов (8 страниц)

Печатать страницу
Epson AP-60 - Projector Sound Solution Руководство пользователя

Solving Problems

If you're having a problem with the AP-60, check for a solution in one of these sections:
•
"Basic Operation Problems" below
•
"Sound Problems" below
•
"Problems Using the Pendant Microphone" on page 21
•
"Problems Using the Remote Control" on page 21
If you cannot solve the problem on your own, contact Epson for help.

Basic Operation Problems

Problem
The system doesn't turn on.

Sound Problems

Problem
There is no sound.
There are too many audio
sources playing at the same time.
My voice isn't loud enough.
External audio devices are too
loud
I hear feedback (howling).
Solution
Press the P power button on the AP-60 remote control to turn the system on or off.
The remote control's batteries may need to be replaced. See page 18.
Check the P power light on the AP-60. When the AP-60 is off, the light is orange. This
indicates that the system is receiving power. If the light is not on, make sure that your
electrical outlet is working and that the power cord is connected securely.
Solution
Make sure the AP-60 is turned on. If the AP-60 doesn't receive an audio signal for 60
minutes, it turns off automatically.
Press the Mute button on the remote control to make sure the sound wasn't muted
or turned off.
Try increasing the volume. Depending on your audio source, it's possible that no
sound may be heard at lower settings.
If you've connected an external audio device such as an MP3 player, make sure its
volume control is adjusted to allow sound output.
The AP-60 plays audio from all sources at all times. Turn off undesired audio sources
as necessary.
Use the Gain control wheel on the pendant microphone to increase the
microphone sensitivity.
Adjust the audio levels, see page 16 for details.
Use the Gain control wheel on the pendant microphone to increase the
microphone sensitivity.
Adjust the audio levels, see page 16 for details.
Move the pendant microphone away from the AP-60.
Turn down the Gain control wheel on the pendant microphone, see page 13.
Turn down the master volume, see page 14 for details.
20