Epson AP-60 - Projector Sound Solution Kullanıcı Kılavuzu - Sayfa 20

Projektör Epson AP-60 - Projector Sound Solution için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson AP-60 - Projector Sound Solution 28 sayfaları. Projector sound solution
Ayrıca Epson AP-60 - Projector Sound Solution için: Manuel (5 sayfalar), Kurulum Kılavuzu (28 sayfalar), Bağlantı Kılavuzu (1 sayfalar), Parça Listesi (1 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Ürün Destek Bülteni (8 sayfalar)

Sayfayı Yazdır

Epson AP-60 - Projector Sound Solution Kullanıcı Kılavuzu

Solving Problems

If you're having a problem with the AP-60, check for a solution in one of these sections:

•

"Basic Operation Problems" below

•

"Sound Problems" below

•

"Problems Using the Pendant Microphone" on page 21

•

"Problems Using the Remote Control" on page 21

If you cannot solve the problem on your own, contact Epson for help.

Basic Operation Problems

Problem

The system doesn't turn on.

Sound Problems

Problem

There is no sound.

There are too many audio

sources playing at the same time.

My voice isn't loud enough.

External audio devices are too

loud

I hear feedback (howling).

Solution

Press the P power button on the AP-60 remote control to turn the system on or off.

The remote control's batteries may need to be replaced. See page 18.

Check the P power light on the AP-60. When the AP-60 is off, the light is orange. This

indicates that the system is receiving power. If the light is not on, make sure that your

electrical outlet is working and that the power cord is connected securely.

Solution

Make sure the AP-60 is turned on. If the AP-60 doesn't receive an audio signal for 60

minutes, it turns off automatically.

Press the Mute button on the remote control to make sure the sound wasn't muted

or turned off.

Try increasing the volume. Depending on your audio source, it's possible that no

sound may be heard at lower settings.

If you've connected an external audio device such as an MP3 player, make sure its

volume control is adjusted to allow sound output.

The AP-60 plays audio from all sources at all times. Turn off undesired audio sources

as necessary.

Use the Gain control wheel on the pendant microphone to increase the

microphone sensitivity.

Adjust the audio levels, see page 16 for details.

Use the Gain control wheel on the pendant microphone to increase the

microphone sensitivity.

Adjust the audio levels, see page 16 for details.

Move the pendant microphone away from the AP-60.

Turn down the Gain control wheel on the pendant microphone, see page 13.

Turn down the master volume, see page 14 for details.