Ricoh SR770 Руководство по установке - Страница 3
Просмотреть онлайн или скачать pdf Руководство по установке для Принтер "все в одном Ricoh SR770. Ricoh SR770 4 страницы. Punch kit type for machine code: g060; g080; g082; g106
Печатать страницуHook the connecting bracket onto the screws temporarily
tightened in step .
Fasten the right side of the connecting bracket using a
long screw and the provided screwdriver. Also tighten the
two screws temporarily tightened in step .
Note
❒ If you have the 1000-sheet paper feed unit or 2000-sheet Large
Capacity Tray installed, proceed to step .
If you have the 500-sheet paper feed unit installed,
change the position of the connecting bracket on the side
of the 2 tray finisher to the lower level. Remove the two
screws using the provided screwdriver, the move the
connecting bracket down, and then refasten the screws.
Place the printer's trail on the 2 tray finisher, and then
slide until it stops.
Fasten the rails using a long screw provided screwdriver.
Slowly push the 2 tray finisher toward the printer until it
stops.
Remove the tape fastening the cable to the 2 tray
finisher.
ZHXH350J