Cisco UNIFIED 6911 6911 Руководство по администрированию - Страница 9

Просмотреть онлайн или скачать pdf Руководство по администрированию для IP-телефон Cisco UNIFIED 6911 6911. Cisco UNIFIED 6911 6911 10 страниц.

Chapter 3

Setting Up the Cisco Unified IP Phone

Mounting the Phone to the Wall

You can mount the Cisco Unified IP Phone 6901 on the wall by using a standard telephone wall plate

with an opening for an RJ-45 connector. Cisco recommends that you use Leviton Wall Mount plate

(Leviton type number: 4108W-0SP) to wall mount the Cisco Unified IP Phone 6901. For information on

installing the wall mount kit for Cisco Unified IP Phone 6901, see

Mount for the Cisco Unified IP Phone 6901 and

You can mount the Cisco Unified IP Phone 6911 on the wall by using special brackets available in a

Cisco Unified IP Phone wall mount kit. For information on installing the wall mount kit, see

Appendix E, "Installing the Wall Mount for the Cisco Unified IP Phone 6901 and 6911"

"Cisco Unified IP Phone Non-Lockable Wall Mount."

Wall mount kits are not included with the phone and must be ordered separately.

Note

The LEDs on the MWI on the handset, and the LEDs on the Mute button light up during bootup. Upon

successful completion of the bootup process, the LEDs turn off, and the phone is ready for calls. If the

phone successfully boots up, it has started up properly. If the phone does not start up properly, the user

receives a reorder tone. For more information, see the

page

If you are not using DHCP in your network, you must configure these network settings on the

Cisco Unified IP Phone after installing the phone on the network:

•

Collect this information and see the instructions in

Unified IP Phone."

Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP)

OL-20852-01

7-1.

IP address

IP subnet information

Default Router

TFTP server IP address

Mounting the Phone to the Wall

Appendix E, "Installing the Wall

6911".

"Resolving Startup Problems" section on

Chapter 4, "Configuring Settings on the Cisco

Appendix F,

3-9