Ricoh SP 220SNW Руководство по настройке - Страница 10
Просмотреть онлайн или скачать pdf Руководство по настройке для Принтер Ricoh SP 220SNW. Ricoh SP 220SNW 16 страниц.
Печатать страницу16. Check the result.
Connection has succeeded:
Connect succeed!
Connection has failed:
Connect failed!
• Check the configuration for the router (access point), and then
try the connection again.
17. Configuring the Wi-Fi settings is complete.
Easy Setup Using the WPS Button
● Before doing the following procedure, install the printer
driver according to the procedure on page 5
"Connecting the Machine (USB/Network)".
● Make sure the Ethernet cable is not connected to the
machine.
● In Steps 16 to 17, configure each setting within two
minutes.
The following item is necessary to set up a wireless
connection.
● Router (access point)
1.
Check that the router (access point) is working correctly.
2.
Press the [User Tools] key.
3.
Press the [ ] or [ ] key to select [Network Settings], and
then press the [OK] key.
User Tools
8 9
Tray Paper Settings
Network Settings
Print List/Report
4.
If you are requested to enter a password, enter the password
using the number keys, and then press the [OK] key.
A password for accessing the [Network Settings] menu can be
specified in [Admin. Tools Lock] under [Admin. Tools] menu.
5.
Press the [ ] or [ ] key to select [Wi-Fi], and then press the
[OK] key.
Network Settings
2 4
Ethernet
Wi-Fi
IPv4 Configuration
6.
Select [Wi-Fi Enable], and then press the [OK] key.
Wi-Fi
Wi-Fi Enable
8
DSG355
DSG356
DSH080
DSH078
DSG084
DSG085
7.
Press the [ ] or [ ] key to select [Enable], and then press
the [OK] key.
Wi-Fi Enable
Disable
Enable
8.
Press the [User Tools] key to return to the Initial screen.
9.
Wait until the machine restarts.
10. Press the [User Tools] key.
11. Press the [ ] or [ ] key to select [Network Settings], and
then press the [OK] key.
User Tools
10 11
Wi-Fi Setup Wizard
Network Settings
Print List/Report
12. If you are requested to enter a password, enter the password
using the number keys, and then press the [OK] key.
A password for accessing the [Network Settings] menu can be
specified in [Admin. Tools Lock] under [Admin. Tools] menu.
13. Press the [ ] or [ ] key to select [Wi-Fi], and then press the
[OK] key.
Network Settings
2 4
Ethernet
Wi-Fi
IPv4 Configuration
14. Press the [ ] or [ ] key to select [WPS], and then press the
[OK] key.
Wi-Fi
6 7
Current Connection
Input SSID
WPS
15. Press the [ ] or [ ] key to select [PBC], and then press the
[OK] key.
WPS Type
1 2
PBC
PIN
16. Press [Yes].
PBC
WPS PBC Connect ?
Yes
No
"Please push the [AP] within 2 minutes" appears, and the machine
starts to connect in PBC method.
DSG086
DSH080
DSG087
DSG084
DSH049
DSG092
DSG093