Ricoh SP 220SNW Руководство по настройке - Страница 9

Просмотреть онлайн или скачать pdf Руководство по настройке для Принтер Ricoh SP 220SNW. Ricoh SP 220SNW 16 страниц.

Печатать страницу

Easy Setup Using the Wi-Fi Setup Wizard

The following item is necessary to set up a wireless
connection.
● Router (access point)

Checking the SSID and Encryption key

The SSID and Encryption key for the router (access point) may be
printed on a label affixed to the router (access point). For details about
the SSID and Encryption key, refer to the router (access point) manual.
Confirm the SSID and Encryption key, and write them down on the
blank space as shown below.
SSID:
Encryption key:

Configuring Settings Using the Control Panel

● Before doing the following procedure, install the printer
driver according to the procedure on page 5
"Connecting the Machine (USB/Network)".
● Make sure the Ethernet cable is not connected to the
machine.
1.
Check that the router (access point) is working correctly.
2.
Press the [User Tools] key.
3.
Press the [ ] or [ ] key to select [Network Settings], and
then press the [OK] key.
User Tools
8 9
Tray Paper Settings
Network Settings
Print List/Report
4.
If you are requested to enter a password, enter the password
using the number keys, and then press the [OK] key.
A password for accessing the [Network Settings] menu can be
specified in [Admin. Tools Lock] under [Admin. Tools] menu.
5.
Press the [ ] or [ ] key to select [Wi-Fi], and then press the
[OK] key.
Network Settings
2 4
Ethernet
Wi-Fi
IPv4 Configuration
SSID
:XXXXXXXXXXXXX
Encryption key
:XXXXXXXXXXXXX
DSG099
DSH080
DSH078
DSG084
6.
Select [Wi-Fi Enable], and then press the [OK] key.
Wi-Fi
Wi-Fi Enable
7.
Press the [ ] or [ ] key to select [Enable], and then press
the [OK] key.
Wi-Fi Enable
Disable
Enable
8.
Press the [User Tools] key to return to the Initial screen.
9.
Wait until the machine restarts.
10. Press the [User Tools] key.
11. Press the [ ] or [ ] key to select [Wi-Fi Setup Wizard], and
then press the [OK] key.
User Tools
8 10
Tray Paper Settings
Wi-Fi Setup Wizard
Network Settings
12. If you are requested to enter a password, enter the password
using the number keys, and then press the [OK] key.
A password for accessing the [Wi-Fi Setup Wizard] menu can be
specified in [Admin. Tools Lock] under [Admin. Tools] menu.
13. Press the [ ] or [ ] key to select SSID of the router (access
point) from the searched SSID list, and then press the [OK]
key.
14. Enter the encryption key using the number keys, and then
press the [OK] key.
Password
Key :
(8-63 chars/64 hex)
WPA2-PSK
• As the passphrase, you can enter either 8 to 63 ASCII characters
(0x20-0x7e) or 64 hexadecimal digits (0-9, A-F, a-f).
• For details about checking the encryption key, see "Checking the SSID
and Encryption key".
15. Press the [OK] key.
Are you sure to connect?
(OK/Back)
DSG085
DSG086
DSH080
DSH048
DSG353
DSG354
7