Ricoh CF5010 Руководство по эксплуатации - Страница 21

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Аксессуары для принтеров Ricoh CF5010. Ricoh CF5010 35 страниц. Cover feeder

Печатать страницу
Ricoh CF5010 Руководство по эксплуатации
X03258 CF5010e Service manual
CF-001
Fault Code CF-001, indicates that the feed motor (CF-M15) has a Short circuit.
Initial Actions
Check fuse F2 on Transformer.
Procedure
Disconnect the motor plug M15. Run the SDS again. Fault code CF-002 (Open circuit) is displayed?
Y
N
Disconnect plug H.P2 from PCB "H". Check wires for Short circuit across leads, the orange wire M15 to H.P2-10
(violet) and the violet wire M15 to H.P2-3 (orange). Is there Short circuit?
Y
N
Replace PCB "H".
Replace wire Harness.
Replace motor CF-M15.
CF-002
Fault Code CF-002, indicates that the feed motor (CF-M15) has an Open circuit.
Initial Actions
Check fuse F2 on Transformer.
Procedure
Disconnect the motor plug M15. Enter Service mode and start feed motor (CF-M15) in check motors. Measure between the
orange wire M15 and the violet wire M15 (PWM 36V and ground). The voltage is approximately 36 VDC?
Y
N
Disconnect plug H.P2 from PCB "H". Measure between J2-3 and J2-10 (PWM 36V and ground). The voltage is
approximately 36 VDC?
Y
N
Replace PCB "H".
Replace wire Harness.
Replace motor CF-M15.
CF-003
Fault Code CF-003, indicates that the feed motor (CF-M15) does not receive any displacement
pulses.
Initial Actions
Check fuse F2 on Transformer.
Enter the Service mode and select feed motor (CF-M15) in check motors.
Procedure
Disconnect the sensor plug Q28 to motor CF-M15. Measure between the red wire Q28 and the black wire Q28 (5V and Signal
ground). The voltage is approximately 5 VDC?
Y
N
Disconnect plug F.P6 from PCB "F". Measure between the J6-18 and J6-19 (5V and Signal ground). The
voltage is approximately 5 VDC?
Y
N
Replace PCB "F".
Replace wire harness.
Disconnect plug F.P6 from PCB "F". Check wires for Continuity / Short circuit from the white wire Q28 to F.P18-18,
the black wire Q28 to F.P18-19, the red wire Q28 to F.P18-4. Is there Continuity and no Short circuit?
Y
N
Replace wire harness.
1. Replace motor CF-M15.
2. Replace PCB "B".
CF-4-2
15 Jan 2013