Cisco 12000 - Series Chassis Modular Expansion Base Инструкции по замене Руководство - Страница 34

Просмотреть онлайн или скачать pdf Инструкции по замене Руководство для Сетевой маршрутизатор Cisco 12000 - Series Chassis Modular Expansion Base. Cisco 12000 - Series Chassis Modular Expansion Base 40 страниц. Internet router line card failures
Также для Cisco 12000 - Series Chassis Modular Expansion Base: Информационный лист (9 страниц), Обзорное руководство (6 страниц), Руководство по устранению неисправностей оборудования (18 страниц)

Regulatory, Compliance, and Safety Information

Reinstall the line card in the card cage as described earlier in this publication and perform another

Step 3

installation check.

If the router fails to restart properly after several attempts and you are unable to resolve the problem,

access Cisco.com or contact your Cisco service representative for assistance. Before calling, however,

make note of any console error messages, unusual LED states, or other router indications or behaviors

that might help to resolve the problem.

Regulatory, Compliance, and Safety Information

This section includes regulatory, compliance, and safety information in the following sections:

•

The complete list of translated safety warnings and agency approvals is available in the Regulatory

Compliance and Safety Information for Cisco 12000 Series Internet Routers publication.

(Document Number 78-4347-xx.)

Electromagnetic Compatibility Regulatory Statements

FCC Class A Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference, in which case users will be

required to correct the interference at their own expense.

Modifying the equipment without Cisco's authorization may result in the equipment no longer

complying with FCC requirements for Class A digital devices. In that event, your right to use the

equipment may be limited by FCC regulation and you may be required to correct any interference to

radio or television communication at your own expense.

You can determine whether your equipment is causing interference by turning it off. If the interference

stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment

causes interference to radio or television reception, try to correct the interference by using one or more

of the following measures:

•

Cisco 12000 Series Router Memory Replacement Instructions

Translated Safety Warnings and Agency Approvals

Electromagnetic Compatibility Regulatory Statements

Turn the television or radio antenna until the interference stops.

Move the equipment to one side or the other of the television or radio.

78-4338-16