Cisco 12000 - Series Chassis Modular Expansion Base Инструкции по замене Руководство - Страница 4

Просмотреть онлайн или скачать pdf Инструкции по замене Руководство для Сетевой маршрутизатор Cisco 12000 - Series Chassis Modular Expansion Base. Cisco 12000 - Series Chassis Modular Expansion Base 40 страниц. Internet router line card failures
Также для Cisco 12000 - Series Chassis Modular Expansion Base: Информационный лист (9 страниц), Обзорное руководство (6 страниц), Руководство по устранению неисправностей оборудования (18 страниц)

GRP, PRP, and Line Card Memory Overview

Figure 1

SIMM socket on the GRP.

The two route memory DIMM sockets on the GRP, labeled U39 (route memory bank 1) and U42 (route

memory bank 2), respectively, enable you to configure route memory in desired increments ranging from

128 to 512 MB.

Note

Table 1

default route memory configuration is 128 MB. If the GRP is currently equipped with one 64-MB DIMM

in socket U39, you can upgrade memory by installing a second 64-MB DIMM in socket U42, or by

removing the existing 64-MB DIMM and replacing it with one 128-MB DIMM.

Figure 1

Bank 2

DRAM DIMMs

Bank 1

Cisco 12000 Series Router Memory Replacement Instructions

shows the locations of the processor memory DRAM DIMM sockets and the Flash memory

GRP route memory configurations of 512 MB are only compatible with Product Number

GRP-B=. Cisco IOS Release 12.0(19)S or 12.0(19)ST or later and ROMMON Release 11.2

(181) or later are also required.

lists the available route memory configurations and associated product numbers for the GRP. The

Memory Locations on the Cisco 12000 Series Router GRP

Backplane connector

PCMCIA slots

slot 0: bottom

slot 1: top

U42

U39

U17

Auxiliary port

Console port

(RJ-45 or MII)

Flash

SIMM

GIGABIT ROUTE PROCESSOR

Alphanumeric

LED displays

Ethernet

interface

78-4338-16