Epson EMP 7900 Руководство по работе с сетью - Страница 16

Просмотреть онлайн или скачать pdf Руководство по работе с сетью для Проектор Epson EMP 7900. Epson EMP 7900 43 страницы. Esc/vp21 command user's guide for business projectors
Также для Epson EMP 7900: Технические характеристики (2 страниц), Руководство пользователя (25 страниц), Технические характеристики (4 страниц), Руководство пользователя (25 страниц), Руководство пользователя (28 страниц), Руководство пользователя (28 страниц)

Epson EMP 7900 Руководство по работе с сетью

Setting Up the Network Interface

Connecting the Network Interface to the Network

Follow the instructions below to connect the network interface to the network.
1. Make sure that your printer is turned off.
2. Connect one end of the network cable to the RJ-45 connector on the
network interface, and the other end to the network.
Caution:
c
❏ You must use a Category 5 shielded twisted-pair cable to connect the
network interface to prevent malfunction.
❏ Do not connect or disconnect the network cable when the printer is on.
Note:
You can use both 10Base-T and 100Base-TX. When you print a lot of data, we
recommend using the highest speed available for you product with light network
traffic.
3. Turn on your printer. After the status lights go off, print a network status
sheet.
Caution:
c
After turning off the printer, wait until the status lights go off before turning it
back on; otherwise the network interface may not work correctly.
Note for Mac OS X 10.4 or later:
Since the printer supports Bonjour/Rendezvous and is on by default, you can use
the printer on a network just by connecting it to the network. If you want to disable
the Bonjour/Rendezvous setting, use the printer's control panel. See "Setting an
IP Address on the Printer's Control Panel" on page 39 for details.
Now, you can configure the network interface to use TCP/IP on the network
and install the printer driver.
16
Setting Up Your System for Network Printing