Cabela's 04202107 Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Кухонная техника Cabela's 04202107. Cabela's 04202107 12 страниц. Manual meat tenderizer/cuber
Печатать страницу
STEP 1. BASE AND SUPPORT LEGS ASSEMBLY
Align each leg with the holes on the base and attach with the Allen Wrench and (4) hex bolts.
NOTE: DO NOT Leave slightly loose to allow for easier placement and alignment of the housing
assembly. DO NOT OVERTIGHTEN!
STEP 3. PLACE HOUSING ON TOP OF LEGS,
ALIGN WITH HOLES AND SECURE WITH (4)
HEX BOLTS. NOTE: DO NOT tighten bolts
completely until all are in place. After al
bolts have been inserted, tighten with the
Allen Wrench starting with the base Tighten
hex-bolts until snug. DO NOT OVERTIGHTEN!
STEP 4A. ATTACHING FEED CHUTE
Attach the feed chute on the housing top
by aligning the hole at the bottom of feed
chute with the alignment post located on
the right side of the top housing opening.
TENDERIZER/CUBER ASSEMBLY INSTRUCTIONS – cont.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 4. ATTACHING FEED CHUTE
Remove the two thumbscrews from the
housing assembly top. Remove top half
of the housing assembly and place on
flat surface.
STEP 4B
STEP 4A
STEP 4B. ATTACHING FEED CHUTE
After aligning the feed chute with the
housing assembly top. Turn the assembly
top and chute on its side in order to
insert the two hex bolts into the feed
chute from the underside of the housing
top. (DO NOT tighten all the way until
both screws are in place)
6
STEP 5
STEP 6