Cisco Aironet 1000 Series Руководство - Страница 10

Просмотреть онлайн или скачать pdf Руководство для Конференц-система Cisco Aironet 1000 Series. Cisco Aironet 1000 Series 20 страниц. Install and upgrade internal modules and field replaceable units
Также для Cisco Aironet 1000 Series: Руководство по развертыванию (40 страниц), Обновление (28 страниц)

Печатать страницу

Install an LTE Pluggable Module on a C1101-4P

Figure 5: C1118-8PLTEAP with Micro SIM Slots

This section describes how to insert a Micro-SIM card into an LTE pluggable module.

To insert the Micro-SIM cards into an LTE Pluggable module:

Note

Ensure to use the correct tool for removing the Micro-SIM door.

1. Place the pluggable module on its bottom side, remove the SIM door screw, use a #1 Philips screw driver

for removing the screws, and then carefully remove the Micro-SIM cover from the pluggable module.

Caution

Do not touch any part of the exposed PCB circuit area when the Micro-SIM cover is removed.

2. In the figure, step 2 below shows the Micro-SIM slot 1 (label 1) and Micro-SIM slot 0 (label 2).

3. Push in each Micro-SIM card (label 3) into the slot until it clicks. Secure the Micro-SIM cover with a

screw, use a number 1 Philips screw driver to secure the screw on the Micro-SIM cover. The recommended

torque is 2.8 - 3.8 inch LBF.

4. You have now successfully inserted the Micro-SIM cards into the LTE pluggable module. The marking

on the Mirco-SIM door should align with Micro-SIM0 on the pluggable module with the arrow pointing

upward.

Install and Upgrade Internal Modules and Field Replaceable Units