Cisco MeetingPlace Audio Server 5.2 Руководство по обновлению - Страница 5
Просмотреть онлайн или скачать pdf Руководство по обновлению для Конференц-система Cisco MeetingPlace Audio Server 5.2. Cisco MeetingPlace Audio Server 5.2 20 страниц. Telepresence conference system
Также для Cisco MeetingPlace Audio Server 5.2: Руководство пользователя (44 страниц), Руководство по началу работы (46 страниц)
Disconnect the power cable, a small connector with four connected wires, from the floppy disk drive in
Step 3
the housing, as shown in
Figure 2
Step 4
Follow the internal pale yellow SCSI cable, as shown in
its connection to the tape drive, located at the top right and partially covered by the backplane.
Step 5
Disconnect the SCSI cable from the tape drive.
Do not to pull off the cable from the hard drives.
Caution
Follow the power cable that you disconnected in
Step 6
receptacle, which is labeled on the backplane power source, as shown in
Figure 3
Disconnect the connector at PWR1.
Step 7
78-16489-01
How to Upgrade to the Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM
Figure
2.
Floppy Disk Drive Inside the Housing
PWR1 Receptacle
Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM Upgrade Procedure
Power Cable
SCSI Cable
Figure
2, from the floppy disk drive to identify
Step 3
to the power source connector at the PWR1
Figure
3.
5