Cisco MeetingPlace Audio Server 5.2 Instrukcja aktualizacji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja aktualizacji dla System konferencyjny Cisco MeetingPlace Audio Server 5.2. Cisco MeetingPlace Audio Server 5.2 20 stron. Telepresence conference system
Również dla Cisco MeetingPlace Audio Server 5.2: Podręcznik użytkownika (44 strony), Podręcznik dla początkujących (46 strony)
Drukuj stronę
Disconnect the power cable, a small connector with four connected wires, from the floppy disk drive in
Step 3
the housing, as shown in
Figure 2
Step 4
Follow the internal pale yellow SCSI cable, as shown in
its connection to the tape drive, located at the top right and partially covered by the backplane.
Step 5
Disconnect the SCSI cable from the tape drive.
Do not to pull off the cable from the hard drives.
Caution
Follow the power cable that you disconnected in
Step 6
receptacle, which is labeled on the backplane power source, as shown in
Figure 3
Disconnect the connector at PWR1.
Step 7
78-16489-01
How to Upgrade to the Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM
Figure
2.
Floppy Disk Drive Inside the Housing
PWR1 Receptacle
Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM Upgrade Procedure
Power Cable
SCSI Cable
Figure
2, from the floppy disk drive to identify
Step 3
to the power source connector at the PWR1
Figure
3.
5