Cisco Quick Set C20 Руководство по началу работы - Страница 25

Просмотреть онлайн или скачать pdf Руководство по началу работы для Конференц-система Cisco Quick Set C20. Cisco Quick Set C20 35 страниц. Tc7.3, english, december 2015
Также для Cisco Quick Set C20: Руководство по началу работы (41 страниц), Руководство пользователя (44 страниц), Руководство по началу работы (42 страниц), Краткое справочное руководство (2 страниц), Краткое справочное руководство (2 страниц), Руководство пользователя (25 страниц), Руководство по устранению неполадок (37 страниц), Монтажный лист (2 страниц), Краткое справочное руководство (2 страниц), Краткое справочное руководство (2 страниц), Руководство по началу работы (32 страниц), Руководство пользователя (48 страниц), Руководство по началу работы (42 страниц), Руководство по началу работы (46 страниц)

Печатать страницу
Cisco Quick Set C20 Руководство по началу работы
Cisco TelePresence Systems
GettinG started Guide
Table of contents
Introduction
remote control and on-screen menu
Setting the system/codec password
You need a username and password to sign in to the web
and command line interfaces of your system.
The video conference system is delivered with a default
user account with username
admin
and no password set.
This user has full access rights to the system.
NOTE: We strongly recommend that you set a password for
the
admin
user to restrict access to system configuration.
Make sure to keep a copy of the password in a safe
You have to contact your Cisco representative if you have
forgotten the password.
The system/codec password cannot be set using the
remote control and on‑screen menu. This has to be done
via the web interface.
1. Sign in to the web interface with your username and
current password.
If a password is not currently set, use a blank
password.
2. Go to the
Maintenance
tab and select
3. Enter the
Current
password, the
New
repeat the new password in the appropriate input fields.
The password format is a string with 0–64 characters.
4. Click
Change
password.
D14639.04 Video Systems Getting Started Guide (TC4.2) | 2011 JULY | © 2011 Cisco Systems, Inc. All rights reserved.
User interfaces
Setting the Administrator Settings menu
password
When starting up the system for the first time the
Administrator Settings menu password is not set.
NOTE: We strongly recommend that you define a password
to protect the Administrator Settings menu, since these
settings affect the behavior of the video conference system.
place.
1. Go to
Home > Settings > Administrator Settings > Set
menu
password.
On the remote control, press the # key to toggle
between lower or upper case characters and numbers:
abc/ABC/123.
2. Enter the menu password. The password you enter is
hidden; each character is replaced with a star (*).
3. Select Save to save the changes, or Cancel to leave
without saving.
Current
4. Press
Home
Change
Password.
password, and
Configuration
Configuration
Appendices
(
)
to exit.
25
www.cisco.com