Cisco TelePresence SpeakerTrack 60 Руководство по эксплуатации камеры - Страница 26

Просмотреть онлайн или скачать pdf Руководство по эксплуатации камеры для Конференц-система Cisco TelePresence SpeakerTrack 60. Cisco TelePresence SpeakerTrack 60 40 страниц. Telepresence
Также для Cisco TelePresence SpeakerTrack 60: Информационный лист (3 страниц), Руководство по установке (19 страниц), Руководство по установке (14 страниц), Руководство (22 страниц), Руководство по эксплуатации камеры (44 страниц)

Cisco TelePresence SpeakerTrack 60 Руководство по эксплуатации камеры
Cisco Quad Camera, Precision 60, SpeakerTrack 60 and PTZ-12 Camera
Contents

Connect PTZ-12 to SX80 Codec

Connect the video cable (HDMI) between the camera and codec.
Codec: Always use Connector 1 (HDMI input) for the main camera.
Camera: Connect to the HDMI output.
Connect the camera control cable (Ethernet).
Connect between the codec's 2nd or 3rd Ethernet port to the
Network port (Ethernet) on the PTZ-12 connector panel.
Connect the power adapter to the camera and connect to power.
Connect other codec cables as described in
Telepresence SX80 installation
guide.
RJ45
D15296.10 Cisco Quad Camera, Precision 60, SpeakerTrack 60, and PTZ-12 Camera SEPTEMBER 2019.
Introduction
Physical interface
theCisco
HDMI
Connecting to a codec
Connecting to a codec
Power
(100-240 V
, 50/60 Hz)
AC
26
Factory reset
Power
adapter
Always use the provided power cable
and adapter.
Copyright © 2019 Cisco Systems, Inc. All rights reserved.
Camera guide
Appendix