Cisco TelePresence SpeakerTrack 60 Руководство по эксплуатации камеры - Страница 30

Просмотреть онлайн или скачать pdf Руководство по эксплуатации камеры для Конференц-система Cisco TelePresence SpeakerTrack 60. Cisco TelePresence SpeakerTrack 60 40 страниц. Telepresence
Также для Cisco TelePresence SpeakerTrack 60: Информационный лист (3 страниц), Руководство по установке (19 страниц), Руководство по установке (14 страниц), Руководство (22 страниц), Руководство по эксплуатации камеры (44 страниц)

Cisco Quad Camera, Precision 60, SpeakerTrack 60 and PTZ-12 Camera

Contents

Quad Camera

A factory reset should only be performed by a system

administrator or in contact with Cisco technical support.

The camera will be reset to factory defaults, and all configu-

ration and logs will be erased.

It is not possible to undo a factory reset.

To perform a factory reset:

1. Locate the pinhole button at the back of the camera.

2. Use a pen or similar to press and hold the factory reset

button for about 6 seconds, until the white LED at the

front of the camera starts blinking.

3. The system restarts two times to complete the factory

reset operation. This procedure may take up to 5 minutes,

depending on the software version.

4. The white LED will start pulsing normally once the fac-

tory reset operation is complete and the unit is starting

normally.

D15296.10 Cisco Quad Camera, Precision 60, SpeakerTrack 60, and PTZ-12 Camera SEPTEMBER 2019.

Introduction

Physical interface

Connecting to a codec

Pinhole for

factory reset

Factory reset

Appendix

Camera guide