Cisco 3020 - Cisco Catalyst Blade Switch Руководство по установке

Просмотреть онлайн или скачать pdf Руководство по установке для Сетевое оборудование Cisco 3020 - Cisco Catalyst Blade Switch. Cisco 3020 - Cisco Catalyst Blade Switch 21 страница. Release notes for the cisco catalyst blade switch 3020 for hp, ciscoã‚â iosã‚â releaseã‚â 12.2(44)se
Также для Cisco 3020 - Cisco Catalyst Blade Switch: Руководство по началу работы (37 страниц), Руководство по началу работы (31 страниц), Quickspecs (12 страниц), Примечание к выпуску (41 страниц), Примечание к выпуску (27 страниц), Примечание к выпуску (23 страниц), Примечание к выпуску (21 страниц)

Switch Installation

This chapter provides instructions on how to install your Cisco Catalyst Blade Switch 3020 for HP,

referred to as the switch module, in the HP c-Class BladeSystem enclosure and how to set up and

configure your switch module. The HP c-Class BladeSystem, referred to as the blade server, is a system

that supports up to 16 server modules and up to 8 Ethernet switch modules. The switch module is

installed in one of the enclosure I/O module bays on the rear panel of the server enclosure.

This chapter also describes how to interpret the power-on self-test (POST) that ensures proper operation

and how to make connections to the switch module.

Read the topics and perform the procedures in this order:

•

This section covers these topics:

•

OL-8914-02

Preparing for Installation, page 2-1

HP c-Class BladeSystem Enclosure Architecture, page 2-5

Installing the Switch Module in the Blade Server, page 2-6

Running Express Setup, page 2-9

Installing and Removing SFP Modules, page 2-15

Connecting to the 10/100/1000 Ports, page 2-18

Connecting to SFP Modules, page 2-19

Where to Go Next, page 2-20

Warnings, page 2-2

Installation Guidelines, page 2-3

Verifying Package Contents, page 2-4

C H A P T E R

Cisco Catalyst Blade Switch 3020 for HP Hardware Installation Guide

2-1