Cisco 3020 - Cisco Catalyst Blade Switch Manual de instalação

Procurar online ou descarregar pdf Manual de instalação para Hardware de rede Cisco 3020 - Cisco Catalyst Blade Switch. Cisco 3020 - Cisco Catalyst Blade Switch 21 páginas. Release notes for the cisco catalyst blade switch 3020 for hp, ciscoã‚â iosã‚â releaseã‚â 12.2(44)se
Também para Cisco 3020 - Cisco Catalyst Blade Switch: Manual de iniciação (37 páginas), Manual de iniciação (31 páginas), Especificação rápida (12 páginas), Nota de lançamento (41 páginas), Nota de lançamento (27 páginas), Nota de lançamento (23 páginas), Nota de lançamento (21 páginas)

Imprimir página
Cisco 3020 - Cisco Catalyst Blade Switch Manual de instalação

Switch Installation

This chapter provides instructions on how to install your Cisco Catalyst Blade Switch 3020 for HP,
referred to as the switch module, in the HP c-Class BladeSystem enclosure and how to set up and
configure your switch module. The HP c-Class BladeSystem, referred to as the blade server, is a system
that supports up to 16 server modules and up to 8 Ethernet switch modules. The switch module is
installed in one of the enclosure I/O module bays on the rear panel of the server enclosure.
This chapter also describes how to interpret the power-on self-test (POST) that ensures proper operation
and how to make connections to the switch module.
Read the topics and perform the procedures in this order:
•
•
•
•
•
•
•
•

Preparing for Installation

This section covers these topics:
•
•
•
OL-8914-02
Preparing for Installation, page 2-1
HP c-Class BladeSystem Enclosure Architecture, page 2-5
Installing the Switch Module in the Blade Server, page 2-6
Running Express Setup, page 2-9
Installing and Removing SFP Modules, page 2-15
Connecting to the 10/100/1000 Ports, page 2-18
Connecting to SFP Modules, page 2-19
Where to Go Next, page 2-20
Warnings, page 2-2
Installation Guidelines, page 2-3
Verifying Package Contents, page 2-4
C H A P T E R
Cisco Catalyst Blade Switch 3020 for HP Hardware Installation Guide
2
2-1