Cisco 5400 Подготовка к установке - Страница 5

Просмотреть онлайн или скачать pdf Подготовка к установке для Сетевое оборудование Cisco 5400. Cisco 5400 6 страниц. Frus
Также для Cisco 5400: Установка и модернизация (8 страниц)

Печатать страницу

Preparing for Installation

Network Cabling Specification

• Ethernet cables for RJ45 ports

• Serial or console cables used to connect devices like routers

• Shielded USB cables with properly terminated shields for the USB port

• Standard Shielded Cable with 15-Pin VGA Male Connector

Required Tools and Equipment

You will need the following equipment to install the device and its equipment:

• ESD-preventive cord and wrist strap

• Phillips screwdrivers: small, 3/16-in. (4 to 5 mm), and medium, 1/4-in. (6 to 7 mm)

• Screws that fit your rack

• Wire crimper for chassis grounding - to be used along with the ground lug kit

• One AWG 6 cable for the ground lug kit

In addition, depending on the type of modules you plan to use, you might need the following equipment to

connect a port to an external network

• Cables for connection to the WAN and LAN ports (dependent on the configuration)

Note

The ground lug is for chassis grounding and is NEBS compliant.

Note

If you order the required cables when you purchase the device, the cables ship

along with the product.

Network Cabling Specification

Preparing for Installation