Cisco 5400 설치 준비 - 페이지 5

{카테고리_이름} Cisco 5400에 대한 설치 준비을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 5400 6 페이지. Frus
Cisco 5400에 대해서도 마찬가지입니다: 설치 및 업그레이드 (8 페이지)

Preparing for Installation

Network Cabling Specification

• Ethernet cables for RJ45 ports

• Serial or console cables used to connect devices like routers

• Shielded USB cables with properly terminated shields for the USB port

• Standard Shielded Cable with 15-Pin VGA Male Connector

You will need the following equipment to install the device and its equipment:

• ESD-preventive cord and wrist strap

• Phillips screwdrivers: small, 3/16-in. (4 to 5 mm), and medium, 1/4-in. (6 to 7 mm)

• Screws that fit your rack

• Wire crimper for chassis grounding - to be used along with the ground lug kit

• One AWG 6 cable for the ground lug kit

In addition, depending on the type of modules you plan to use, you might need the following equipment to

connect a port to an external network

• Cables for connection to the WAN and LAN ports (dependent on the configuration)

Note

The ground lug is for chassis grounding and is NEBS compliant.

Note

If you order the required cables when you purchase the device, the cables ship

along with the product.

Network Cabling Specification

Preparing for Installation