Argo HI FLOOR RAY Руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Нагреватель Argo HI FLOOR RAY. Argo HI FLOOR RAY 9 страниц. Micathermic panel heater
Печатать страницу
FIRE IF THE FAN HEATER IS COVERED OR INCORRECTLY
POSITIONED.
Disconnect the mains power when the appliance is not used or
for cleaning operations.
To disconnect the panel heater, push the switches to OFF and
remove the plug from the socket. Pull on the plug only. Do not pull
the cord.
Avoid placing fingers or foreign objects in the air inlet/outlet
grilles, as this may lead to electric shock or fire and may damage
the panel. To avoid the risk of fire, do not block the grilles or tamper
with them in any way while the panel heater operates.
Do not use the panel if the cord or plug is damaged. If the power
supply cord is damaged, it must be replaced by the manufacturer,
dealer or a similarly qualified person so as to avoid any safety risks.
Do not place any objects on the cord and do not bend it. During
operation, the cord must be entirely unwound.
It is not advisable to use extension cords, as these may overheat
and cause the risk of fire. Do not use a single extension cord to
operate more than one panel.
The panel heater heats up significantly during operation. Risk of
burn. To avoid injury, do not allow skin to come into contact with a
hot surface. Use the handle to move the panel. Keep flammable
materials such as furniture, cushions, blankets, paper, clothes,
curtains and similar at a distance of 1 metre.
Do not immerse the cord, plug or any other element of the panel
in water or other liquids.
Do not touch the plug or panel with wet hands.
Avoid using the panel heater in dusty environments or in the
presence of flammable vapours (e.g. in workshops or garages).
Do not place the panel heater above or near another heat
source.
WARNING: AVOID COVERING THE PANEL HEATER TO
PREVENT IT FROM OVERHEATING.
The symbol below signals the above warning:
V 09/16
12