Argo HI FLOOR RAY Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Нагреватель Argo HI FLOOR RAY. Argo HI FLOOR RAY 9 страниц. Micathermic panel heater
Печатать страницу
The panel heater may cause risk of fire if, while in operation, is
covered by or comes into contact with flammable material including
curtains, drapery, blankets, etc. KEEP THE PANEL HEATER
AWAY FROM THESE MATERIALS.
Do not insert and avoid accidental insertion of any external objects
into the ventilation or discharge outlets as this may lead to electric
shock, fire or damage the panel.
A panel heater contains parts that generate arcs or sparks. It must
not be used in potentially dangerous areas such as areas at risk of
fire or explosion, or areas loaded with chemical substances or
humidity.
Do not use the panel on soft surfaces such as beds, where the
grilles may be covered. Always stand the panel heater on a flat,
stable surface when in operation, in order to prevent it from
overturning. Arrange the cord in such a way that the panel heater
and other objects do not rest on it. Do not run the cord under
carpets. Do not cover the cord with blankets, carpets or similar
materials. Place the cord far away from busy areas, or in a place
where it cannot be accidentally pulled-out.
This panel cannot be used in bathrooms, laundry rooms, next to a
shower or swimming pool or in similar indoor environments. Never
position the panel where it may fall into a bath or other containers of
water.
Never position the panel on a wet floor.
In any case, the adjustment knobs must never be accessible by
anyone in a bath or shower.
Do not position the panel heater below an electric socket.
The socket must be earthed.
Do not allow the electric cord to touch the mesh cover when the
panel is hot or in operation, in order to avoid the high temperatures
ruining the cord.
Do not operate the panel heater outdoors. Do not use the panel in
front of or near an open window.
Upon initial start-up, the panel heater may emit a slight, harmless
smell. This smell is a normal effect of the initial heating up of the
internal heating elements, and should not recur later on.
Do not attempt to repair, disassemble or modify the panel. The
panel does not contain parts that can be repaired by the user.
V 09/16
13