Sony A 7 R IV Краткое руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Цифровая камера Sony A 7 R IV. Sony A 7 R IV 6 страниц.

right side of the control wheel.

4. Select (

SET), and then press the center of the control wheel.

5. Aim the camera in the appropriate direction for the given lighting condition

and press the center of the control wheel. See the ExpoDisc Instruction

Manual for more information on where to aim the camera.

6. After the shutter sound beeps, the calibrated values (ColorTemperature and

Color ﬁlter) are displayed and registered.

7. Press the center of the control wheel. The monitor returns to the recording

information display with the memorized white balance retained. The custom

white balance setting registered in this operation is effective until a new

setting is registered.

8. If you get the message "Custom WB error" this indicates that you need to

adjust your exposure and reattempt to set your white balance.

9. From the White Balance menu, select (

where you set the white balance measurement).

10. Remove the ExpoDisc, return the camera to auto focus if desired and start

shooting.

Sony DSC-F828

1. Install the ExpoDisc and set the camera to Manual Focus mode.

2. Allow the camera to set an automatic exposure using the "P", "S" or "A"

modes or set the correct manual exposure in "M" mode.

3. Set your camera to the Standard Color mode. Press Menu. When the menu

appears, use the Multi-Selector to select Color and then select Standard.

4. Press and hold the WB Button and select the WB Set setting with the

Command Dial. The WB Set indicator appears in the LCD monitor.

5. Aim the camera in the appropriate direction for the given lighting condition

and press the shutter release button. See the ExpoDisc Instruction Manual for

more information on where to aim the camera.

6. Press the center of the Multi-Selector. The screen momentarily turns black

and the WB Set indicator ﬂashes quickly. DO NOT SHAKE OR STRIKE THE

CAMERA WHILE THE WB INDICATOR IS FLASHING QUICKLY.

7. When the custom white balance has been adjusted and stored in memory, the

WB indicator lights up.

8. If the WB indicator ﬂashes slowly, the white balance is not set or was not able

to be set. In this case, adjust the exposure settings and recalibrate.

9. Remove the ExpoDisc, place camera in desired shooting mode and start

shooting.

"Sony" and the Sony camera models listed are trademarks of Sony, Inc.

Custom 1, 2, or 3 depending on