Sony A 7 R IV Краткое руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Цифровая камера Sony A 7 R IV. Sony A 7 R IV 6 страниц.

7. Aim the camera in the appropriate direction for the given lighting condition

and press the shutter release button. See the ExpoDisc Instruction Manual for

more information on where to aim the camera. The screen will display color

temperature values.

8. Press the center button on the controller to store the white balance recorded.

9. Remove the ExpoDisc, place camera in desired shooting mode and start

shooting.

Sony A200 / A300 / A350

1. Install the ExpoDisc and set the camera to Manual Focus mode.

2. Allow the camera to set an automatic exposure using the "P", "S" or "A"

modes or set the correct manual exposure in "M" mode.

3. Press the Fn button to select the White Balance icon (

4. Select (

SET) with the !/" on the controller.

5. Aim the camera in the appropriate direction for the given lighting condition

and press the shutter release button. See the ExpoDisc Instruction Manual for

more information on where to aim the camera.

6. Press the center of the controller. The monitor returns to the recording

information display with the memorized custom white balance setting

retained. This white balance setting will stay in effect until a new custom

white balance is registered.

7. If you get the message "Custom WB error" this indicates that you need to

adjust your exposure and reattempt to set your white balance.

8. Remove the ExpoDisc, return the camera to auto focus if desired and start

shooting.

Sony A700

1. Install the ExpoDisc and set the camera to Manual Focus mode.

2. Allow the camera to set an automatic exposure using the "P", "S" or "A"

modes or set the correct manual exposure in "M" mode.

3. Press the WB (White Balance) Button to display the White Balance mode

screen.

4. Select a custom white balance item (

5. Select (

SET), then press the center of the multi-selector to display the

6. The message "Use spot metering area. Press shutter to calibrate." will

appear on the screen.

7. Aim the camera in the appropriate direction for the given lighting condition

and press the shutter release button. See the ExpoDisc Instruction Manual for

more information on where to aim the camera.

8. The register selection screen appears. Select a memory number with !/"

(

1), then press the center of the multi-selector. The Sony A700 allows you

"Sony" and the Sony camera models listed are trademarks of Sony, Inc.

) using the #/$ on the multi-selector.