Sony A 7 R IV Краткое руководство по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Цифровая камера Sony A 7 R IV. Sony A 7 R IV 6 страниц.

a new setting is registered.

7. If you get the message "Custom WB error" this indicates that you need to

adjust your exposure and reattempt to set your white balance.

8. From the White Balance menu, select (

9. Remove the ExpoDisc, return the camera to auto focus if desired and start

shooting.

Sony A7 R II

1. Install the ExpoDisc and set the camera to Manual Focus mode.

2. Allow the camera to set an automatic exposure using the "P", "S" or "A"

modes or set the correct manual exposure in "M" mode.

3. From the MENU navigate to the Camera Settings1 screen and select White

Balance and then Custom Setup.

4. Aim the camera in the appropriate direction for the given lighting condition

and press the center of the control wheel. See the ExpoDisc Instruction

Manual for more information on where to aim the camera.

5. After the shutter sound beeps, the calibrated values (ColorTemperature and

Color ﬁlter) are displayed.

6. Select a registration number (1-3) using the right/left button. The monitor

returns to the recording information display retaining the memorized custom

white balance setting.

7. If you get the message "Custom WB error" this indicates that you need to

adjust your exposure and reattempt to set your white balance.

8. From the White Balance menu, select the Custom 1 / Custom 2 / Custom 3

depending on where you saved the measurement in step 6.

9. Remove the ExpoDisc, return the camera to auto focus if desired and start

shooting.

Sony A33/A55

1. Install the ExpoDisc and set the camera to Manual Focus mode.

2. Allow the camera to set an automatic exposure using the "P", "S" or "A"

modes or set the correct manual exposure in "M" mode.

3. Press the WB (White Balance) on the control button to display the White

Balance mode screen.

4. Select (

SET) with the !/" on the control button, then press the center of

the control button.

5. Aim the camera in the appropriate direction for the given lighting condition

and press the shutter release button. See the ExpoDisc Instruction Manual for

more information on where to aim the camera.

6. The shutter clicks and the calibrated values (ColorTemperature and Color

ﬁlter) are displayed.

7. Press the center of the control button again. The monitor returns to the

"Sony" and the Sony camera models listed are trademarks of Sony, Inc.

Custom 1).