Cisco ASA 5516-X Монтаж и подключение - Страница 5

Просмотреть онлайн или скачать pdf Монтаж и подключение для Сетевое оборудование Cisco ASA 5516-X. Cisco ASA 5516-X 6 страниц. Threat defense reimage guide
Также для Cisco ASA 5516-X: Руководство по установке оборудования (32 страниц), Краткое руководство по эксплуатации (8 страниц), Руководство по простой настройке (11 страниц), Краткое руководство по эксплуатации (9 страниц), Руководство по программному обеспечению (37 страниц), Руководство (14 страниц)

Печатать страницу
Cisco ASA 5516-X Монтаж и подключение
Mount and Connect
Figure 3: ASA 5508-X and ASA 5516-X Console Port Connection
1
Mini USB Type B console port
3
USB Type A
Step 4
Connect the end of the cable with the DB-9 connector (or USB Type A) to the terminal or PC. If your terminal or PC has
a console port that does not accommodate a DB-9 connector, you must provide an appropriate adapter for that port.
The LED for the console port turns green and within a few moments the Found New Hardware Wizard appears.
Step 5
Follow the instructions to complete the driver installation.
Step 6
To communicate with the ASA, start a terminal emulator application. This software should be configured with the
following parameters:
• 9600 baud
• 8 data bits
• no parity
• 1 stop bit
• no flow control
Connect to the Console Port with Mac OS X
Follow these steps to connect a Mac OS X system USB port to the console using the built-in OS X Terminal
utility, or alternatively you can use a separate terminal emulator application.
Connect to the Console Port with Mac OS X
2
Mini USB Type B to USB Type
A console cable
Mount and Connect
5