Cisco ASR 9000 Series Руководство по конфигурации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по конфигурации для Сетевое оборудование Cisco ASR 9000 Series. Cisco ASR 9000 Series 50 страниц. Line card
Также для Cisco ASR 9000 Series: Настройка параметров сети (26 страниц), Руководство по конфигурации (46 страниц), Руководство (24 страниц), Настройка (46 страниц), Руководство (44 страниц), Краткое справочное руководство (7 страниц)

Печатать страницу
Cisco ASR 9000 Series Руководство по конфигурации
Configuring Serial Interfaces on the Cisco ASR 9000 Series Router
•
•
•
•
•
•
•
On the Cisco ASR 9000 Series Router, a single serial interface carries data over a single interface using
PPP, Cisco HDLC, or Frame Relay encapsulation.
High-Level Overview: Serial Interface Configuration on Clear-Channel SPAs
Cisco 2-Port and 4-Port Clear Channel T3/E3 SPA.
Table 14
Overview: Configuring a T3 Serial Interface on a Clear Channel SPA
1.
Use the hw-module subslot
command to set serial mode for the
SPA to be T3, if necessary.
Note
By default, the 2-Port and
4-Port Clear Channel T3/E3
SPA is set to run in T3 mode.
2.
3.
associated with the T3 controller
you configured in Step 2.
2-Port and 4-Port Clear Channel T3/E3 SPA.
Table 15
Overview: Configuring an E3 Serial Interface on a Clear Channel SPA
1.
Use the hw-module subslot
command to set serial mode for the
SPA to be E3.
2.
Configure the E3 controller.
3.
Configure the serial interface that is
associated with the E3 controller
you configured in Step 2.
OL-26061-03
Keepalive Timer, page 508
IPHC Overview, page 512
provides a high-level overview of the tasks required to configure a T3 serial interface on the
Module
"Configuring Clear Channel T3/E3 and
Channelized T3 and T1/E1 Controllers
on the Cisco ASR 9000 Series Router"
"Configuring Clear Channel T3/E3 and
Channelized T3 and T1/E1 Controllers
on the Cisco ASR 9000 Series Router"
"Configuring Serial Interfaces on the
Cisco ASR 9000 Series Router"
provides a high-level overview of the tasks required to configure an E3 serial interface on a
Module
"Configuring Clear Channel T3/E3 and
Channelized T3 and T1/E1 Controllers
on the Cisco ASR 9000 Series Router"
"Configuring Clear Channel T3/E3 and
Channelized T3 and T1/E1 Controllers
on the Cisco ASR 9000 Series Router"
Configuring Serial Interfaces on the
Cisco ASR 9000 Series Router
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
Information About Configuring Serial Interfaces
Section
Setting the Card Type
Setting the Card Type
"How to Configure Serial Interfaces"
Section
Setting the Card Type
Setting the Card Type
How to Configure Serial Interfaces
503