Cisco ASR 9000 Series Посібник з конфігурації - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з конфігурації для Мережеве обладнання Cisco ASR 9000 Series. Cisco ASR 9000 Series 50 сторінок. Line card
Також для Cisco ASR 9000 Series: Налаштування мережевих параметрів (26 сторінок), Посібник з конфігурації (46 сторінок), Посібник (24 сторінок), Налаштування (46 сторінок), Посібник (44 сторінок), Короткий довідник (7 сторінок)
Друкувати сторінку
Configuring Serial Interfaces on the Cisco ASR 9000 Series Router
•
•
•
•
•
•
•
On the Cisco ASR 9000 Series Router, a single serial interface carries data over a single interface using
PPP, Cisco HDLC, or Frame Relay encapsulation.
High-Level Overview: Serial Interface Configuration on Clear-Channel SPAs
Table 14
Cisco 2-Port and 4-Port Clear Channel T3/E3 SPA.
Table 14
Overview: Configuring a T3 Serial Interface on a Clear Channel SPA
1.
Use the hw-module subslot
command to set serial mode for the
SPA to be T3, if necessary.
Note
By default, the 2-Port and
4-Port Clear Channel T3/E3
SPA is set to run in T3 mode.
2.
3.
associated with the T3 controller
you configured in Step 2.
Table 15
2-Port and 4-Port Clear Channel T3/E3 SPA.
Table 15
Overview: Configuring an E3 Serial Interface on a Clear Channel SPA
1.
Use the hw-module subslot
command to set serial mode for the
SPA to be E3.
2.
Configure the E3 controller.
3.
Configure the serial interface that is
associated with the E3 controller
you configured in Step 2.
OL-26061-03
PPP Encapsulation, page 506
Keepalive Timer, page 508
Frame Relay Encapsulation, page 509
Serial Interface Naming Notation, page 511
IPHC Overview, page 512
provides a high-level overview of the tasks required to configure a T3 serial interface on the
Module
"Configuring Clear Channel T3/E3 and
Channelized T3 and T1/E1 Controllers
on the Cisco ASR 9000 Series Router"
"Configuring Clear Channel T3/E3 and
Channelized T3 and T1/E1 Controllers
on the Cisco ASR 9000 Series Router"
"Configuring Serial Interfaces on the
Cisco ASR 9000 Series Router"
provides a high-level overview of the tasks required to configure an E3 serial interface on a
Module
"Configuring Clear Channel T3/E3 and
Channelized T3 and T1/E1 Controllers
on the Cisco ASR 9000 Series Router"
"Configuring Clear Channel T3/E3 and
Channelized T3 and T1/E1 Controllers
on the Cisco ASR 9000 Series Router"
Configuring Serial Interfaces on the
Cisco ASR 9000 Series Router
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
Information About Configuring Serial Interfaces
Section
Setting the Card Type
Setting the Card Type
"How to Configure Serial Interfaces"
Section
Setting the Card Type
Setting the Card Type
How to Configure Serial Interfaces
503