Cisco Firepower 4100 Series Руководство - Страница 9

Просмотреть онлайн или скачать pdf Руководство для Сетевое оборудование Cisco Firepower 4100 Series. Cisco Firepower 4100 Series 38 страниц. Rack-mount and ground the chassis
Также для Cisco Firepower 4100 Series: Руководство по эксплуатации (17 страниц), Руководство (8 страниц), Руководство по техническому обслуживанию и модернизации (20 страниц), Руководство (36 страниц), Руководство (8 страниц), Руководство (42 страниц)

Overview

Network Ports

Management Port

Front Panel LEDs

The following figure and table describe the Firepower 4100 front panel LEDs.

Figure 6: Front Panel LEDs

• USB drive formatted with FAT32

• Boot kick-start image from the Supervisor ROMMON for discovery recovery purposes

• Copy files to and from workspace:/ and volatile:/ within local-mgmt. The most relevant files are:

• Core files

• Ethanalyzer packet captures

• Tech-support files

• Security module log files

• Platform bundle image upload using download image usbA:

The USB Type A port does not support Cisco Secure Package (CSP) image upload.

The Firepower 4100 chassis has eight fixed ports that require 1-Gb/10-Gb SFP/SFP+ transceivers (fiber

or copper). They are numbered from left to right starting with 1 and are named Ethernet 1/1 through

Ethernet 1/8. The 4100 also has two network module slots that support different numbers of ports

depending on the network module. See

See for

Supported SFP/SFP+ and QSFP Transceivers, on page 25

Each port has LEDs that represent link/activity status.

The Firepower 4100 chassis has a management port that requires a 1-Gb fiber or copper SFP.

Network Modules, on page 11

the list of supported transceivers.

Front Panel LEDs

for the supported network modules.

Overview