Cisco Firepower 9300 Установка и обслуживание
Просмотреть онлайн или скачать pdf Установка и обслуживание для Сетевое оборудование Cisco Firepower 9300. Cisco Firepower 9300 36 страниц. Installation, maintenance, and upgrade guide
Также для Cisco Firepower 9300: Начало работы (42 страниц)
Печатать страницуInstallation, Maintenance, and Upgrade
•
•
•
•
•
•
•
•
•
•
Remove and Replace the Supervisor
You can remove the Firepower 9300 Supervisor while the system is powered on without damage to the
Supervisor hardware or system. However, because the supervisor is controlling the entire chassis, including
the power system, we recommend that you use the power switch on the rear panel of the chassis to put the
system in standby mode. See
Safety Warnings
Warning
Remove and Replace the Supervisor, on page 1
Remove and Replace the SSD, on page 6
Remove and Replace the Power Supply Module, on page 17
Connect the DC Power Supply Module, on page 22
Connect the HVDC Power Supply Module, on page 25
Remove and Replace the Fan Module, on page 29
Install the FIPS Opacity Shield, on page 32
Supervisor
Take note of the following component replacement safety warnings:
Statement 1028 More Than One Power Supply
This unit might have more than one power supply connection. To reduce risk of electric shock,
remove all connections to de-energize the unit.
for more information about the Supervisor.
Installation, Maintenance, and Upgrade
1